Radial calipers

Joined : 26 Dec 2007 Posts : 1

Hi all, I am looking for a set of radial calipers to fit to my SP1. Must be either Brembo's, AP's or Nissin's. Any one help?
Thanks
N1xxl

Joined : 05 Dec 2006 Posts : 3

Don't forget Beringer as 'dims' are same & you're more likely to find access to them in Endurance than you are the above mentioned. Beautiful things, but tend to be wide mouth as all true Endurance calipers are. Word of caution, endurance pads are thicker than standard and if you fit Endurance calipers you must have pads. On your standard bike you'll end up with needing to re-engineer from the yokes down if you want the discs to sit central in the calipers, or run part worn pads on the outside of the caliper to compensate and then you'll expose the inside pistons too a lot more crud than you're used to! Seal sourcing will be essential and these aren't available from Brembo at all, also the deeper nature of thse calipers could lead to contact with the wheel itself. Caveat Emptor!

Subject: Re: Radial calipers Thu Dec 27, 2007 8:08 pm

Where Hondas are concerned, RMT21 run the lone Honda in World Endurance - maybe Thomas Roth can help source what you need?
Contact Thomas at T.Roth@rmt-racing.com